Ricoh 2400L - Manual (Page 550)

Switching Multi-copy Document On or Off
Before you can make multiple copies, you have to switch it on using Function 62.
1. Function 6 2 2 2 2 6 2 and Yes. Y/NEXTk
SELECT LINE
2. Scroll through the list of features with
k
until the screen is as shown opposite.
Y/NEXTk
# OF COPIES ON/OFF
3. Yes. # OF COPIES Y/j k
ON kOFF
4. Change the on/off setting by pressing
j
or
k
.
# OF COPIES Y/j k
kON OFF
5. Finish: Yes and Function.
Setting the Number of Copies
1. Function 6 2 2 2 2 8 3 and Yes. NO. OF COPIES KPAD/Y
1 SETS
2. Input the number of copies that you need,
then press Yes.
Copies of incoming faxes will be collated.
NO. OF COPIES KPAD/Y
3 SETS
NOTE: Maximum number of copies: 9
To use Multi-copy Document Reception, you must switch Reverse
Order Printing on. See page 92 for how to do this.
3. Function.
Programming the Special Terminals to Make Multi-copies
To program the list of senders, see "Entering a List of Senders to Treat Differently
(Function 81 Special Terminals )" on page 101.
Choosing How to Treat the Special Terminals
You have to select one of the following two things
❐ Make multiple copies of messages from Special Terminals
or
❐ Make multiple copies of all messages except those from Special Terminals.
RECEPTION ADVANCED FEATURES
94