Ricoh 2400L - Manual (Page 811)

Options for Polling Transmission
When you store a document in memory for Polling Transmission, you also have
the following options:
❐ Personal Code: This is the same as for normal transmission (see page 32).
❐ Page Count:This is the same as for normal transmission (see page 36).
❐ TTI On/Off: This is the same as for normal transmission (see page 37).
❐ Polling Standby Duration: There are two options.
  : The message will be automatically erased from memory after it has
been polled once.

: The message will be kept in memory until you erase it yourself using
the user parameter of the Function 63. While the message is in the memory, it
can be polled at any time by as many terminals that need it.
The options are only available if the



can be seen in the top right corner of
the display:
1. Press


. 


  



  
2. Scroll through the options using the


ar-
row on the scroll key, then Yes.
Example: TTI on/off



  






The list of available options is as follows:
❐ Personal Code
❐ Page Count
❐ TTI
3. If you wish to switch on or off (TTI), use

and


of the scroll key until the dis-
played setting is correct.
4. Either
❐ If you wish to switch other options (Personal Code or Page Count), press
of the scroll
key until the required option is shown. Then enter the personal code on page count.
❐ Finish : Yes and Function.
OTHER ADVANCED FEATURES
120