Ricoh 2400L - Manual (Page 85)

Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine’s memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 156 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
❐ At this time, you can print a User Parameter
List if you press
j
and Start.
SETTING? Y/j
PRINT LIST j
2. Press Yes. The settings for switch 00 are
now shown on the bottom line of the dis-
play.
KPAD/Y/j k
SWITCH 00 :0000 0000
3. Press
k
until the settings for switch 05 are
shown.
The setting that you need to change is
that for digit 1.
SWITCH 05 : 0000 0000
Digit 1 (Double underlined)
0: Messages are not rejected.
1: Messages are rejected.
4. If you wish to change the setting, press 1
on the ten keypad.
5. Finish: Yes and Function.
Cross-references
Substitute Reception: see page 36.
Confidential Reception: see page 69.
Memory Lock: see page 72. Forwarding: see page 80.
RECEPTION ADVANCED FEATURES
76