Ricoh 2400L - Manual (Page 714)

If your machine is behind a PBX, dial the access code, then a pause, then the telephone
number. For an international number, place a pause after the country code. To input a
pause, press the Pause key.
5. Yes.

 



 
  

6. Either
❐ Dial another number: Go to step 4.
❐ Press Start.
The machine will dial the first destination (or, if you selected Send Later, it
will return to standby mode and the fax message will be sent at the time that
you selected).
Note: In theory, you can send the same fax message to up to 132 different
destinations using the above procedure. However, this number
depends on how many numbers are currently waiting in memory to
be dialed. See the table on page 221 for more information concerning
the limitations to this feature.
Transmission using the Group key
The followings are the procedure using the Group key. You have to program the
Group key into the Quick Dial 30 (Programming the Group Dial. See page 217).
1. Place a document into the feeder.

 



   

2. Press 30 of the Quick Dial key (Group
key).

 !"
3. Enter a Group number.
Example 1; press 1 of the ten key pad.

 


 




4. Start.
RO
U
T
IN
E
OPERA
T
IO
N
ROUTINE OPERATION SENDING A FAX MESSAGE
23