Ricoh 2400L - Manual (Page 170)

Switch 07 - Do not change these settings
Digit Purpose
0 to 7 Do not change these settings.
Switch 08 - Various
Digit Purpose
0, 1
Multicopy reception
(Feature Expander Required)
Digit 1 Digit 0 Setting
X
0 Off*
0 1 Messages from senders whose RTI/CSI’s
are programmed are multi-copied.
1 1 Messages from senders whose RTI/CSI’s
are not programmed are multi-copied.
2, 3
Authorized Reception Digit 3 Digit 2 Setting
X 0
Off *
0 1 Receive messages only from
senders whose RTI/CSI’s are
programmed.
1 1 Receive messages only from
senders whose RTI/CSI’s are not
programmed.
4, 5 Do not use these settings.
6, 7
Forwarding
(Feature Expander Required)
Digit 7 Digit 6 Setting
X 0
Off*
0 1 Forward messages only from
senders whose RTI/CSI’s are
programmed.
1 1 Forward messages only from
senders whose RTI/CSI’s are not
programmed.
ON/OFF SWITCHES AND USER PARAMETERS TECHNICAL REFERENCE
160