Ricoh 2400L - Manual (Page 720)

Home Position Setting Adjustments
For the contrast, resolution, and halftone, you can select whether the settings
return to home position at the end of transmission (in a new machine, they do).
Also, you can change the home positions of these settings.
If you need other adjustments, contact a service representative.
The procedure is as follows (see page 184 if you need more information about
the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
❐ At this time, you can print a User
Parameter List if you press

and Start.

 0 




2. Yes. 


1 
 
3. The settings for switch 00 are now
shown on the bottom line of the dis-
play.
The digits are numbered from 7 to
0; the setting of digit 7 is shown at
the left side of the display and digit
0 is at the right.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit Purpose
0 Stamp 0: Off* 1: On
1
2
Contrast home position
Digit 2 Digit 1 Setting
0 0 Normal*
0 1 Lighten
1 0 Darken
3 Do not change this setting.
4
5
Resolution home position
Digit 5 Digit 4 Setting Digit 5 Digit 4 Setting
0 0 Standard* 1 0 Fine
0 1 Detail 1 1 Do not change these
settings.
6
Tramsmission mode home position
0: Memory transmission*
1: Immediate transmission
7 Halftone on/off home position 0: Off* 1: On
* Factory setting



Digit

7

6

5

4



2

1

0
RO
U
T
IN
E
OPERA
T
IO
N
ROUTINE OPERATION SENDING A FAX MESSAGE
29