Ricoh 2400L - Manual (Page 268)

1. Function 3 3 and Yes. GROUP t 1-7/N
PRINT LIST j/SEARCH k
2. Input the number of the group that you
wish to program.
Example: If you want to delete or edit
the contents of the Group 1; press 1 of
the ten key pad . And press Yes.
GROUP 1 Y/N
PROGRAM QUICK?
3. Either;
- If you want to change the Quick Dial
key where that Group is stored; Yes
GROUP 1 Y/N
n 08
And press No and press a New Quick
Dial Key. (Note; If that Group is not pro-
grammed into a Quick Dial Key, you
don’t have to do it.)
GROUP 1 Y/N
n 16
And press Yes. Then go to step 4. GROUP 1 Y/N
PROGRAM LABEL?
- If you don’t program that group into a
Quick Dial Key, press No, then go to
step 4.
GROUP 1 Y/N
PROGRAM LABEL?
4. Either;
- If you want change the label, press
Yes.
GROUP 1 ABC Y/N
DISTRIBUTORt t t t t t t t t
Edit the label and press Yes. GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
- If you keep this label, press No.
5. Input a number that you wish to store in
or erase from the group.
Example:
Quick Dial 01: 01 of the quick dial key
Speed Dial 30: Speed Dial, 3 and 0 of
the ten key pad.
Full number: Enter at the ten key pad.
GROUP 1 Y/N
SPEED 30
6. Yes.
If "ALREADY PROGRAMMED" ap-
pears, either:
- Keep the number: No.
- Erase the number Yes.
Go back to step 5.
GROUP 1 DIAL/N
t t t t t t t t t t t t t t t t t t t t
BEFORE YOU SE
ND
YOUR
FIRST
F
A
X
BEFORE YOU SEND YOUR FIRST FAX
51