Lenze E94AYCCA - Manual (Page 12)

E94AYCCA communication manual (CANopen®)
Safety instructions
General safety and application notes
12
L
EDS94AYCCA EN 5.0 - 06/2012
2 Safety instructions
2.1 General safety and application notes
 Lenze drive and automation components ...
– may only be used as directed.
 Application as directed
( 14)
– must never be commissioned if they display any signs of damage.
– must never be modified technically.
– must never be commissioned if they are not fully mounted.
– must never be operated without the required covers.
– can have live, moving and rotating parts during and after operation, depending on
their degree of protection. Surfaces can be hot.
 For Lenze drive components ...
– only use approved accessories.
– only use genuine spare parts supplied by the manufacturer of the product.
 Observe all the specifications contained in the enclosed and corresponding
documentation.
– This is a precondition for ensuring safe, trouble-free operation and for making use of
the stated product features.
 Features
( 15)
– The specifications, processes, and circuitry described in this document are for
guidance only and must be adapted to your own specific application. Lenze does not
take responsibility for the suitability of the process and circuit proposals.

Note!
It is absolutely vital that the stated safety measures are implemented in order to
prevent serious injury to persons and damage to material assets.
Always keep this documentation to hand in the vicinity of the product during
operation.

Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets.