4 settings in the »engineer, Settings in the »engineer, E94aycca communication manual (canopen®) – Lenze E94AYCCA User Manual
Page 85
Advertising
![background image](/manuals/565752/85/background.png)
EDS94AYCCA EN 5.0 - 06/2012
L
85
E94AYCCA communication manual (CANopen®)
Monitoring
Settings in the »Engineer«
10.4
Settings in the »Engineer«
Go to the Monitoring tab to ...
set the
response for the CAN node changing to the "bus OFF" state (
/
set the
).
– If a different value than "0" is entered, the RPDO is expected after the time set has
elapsed.
– If the RPDO is not received within the monitoring time, an error response
parameterised under
/
is initiated.
Advertising