Lenze E94AYCCA - Manual (Page 28)

E94AYCCA communication manual (CANopen®)
Installation
Electrical installation
28
L
EDS94AYCCA EN 5.0 - 06/2012
5.2.3 Bus cable length
5.2.3.1 Total cable length
The baud rate also determines the total cable length.

Note!
• It is absolutely necessary to comply with the permissible cable lengths.
• If the total cable lengths of the CAN nodes differ for the same baud rate, the
smaller value must be used to determine the max. cable length.
• Observe the reduction of the total cable length due to the signal delay of the
repeater.  Checking the use of repeaters
( 30)
Baud rate [kbps] Max. bus length [m]
10 8075
20 4012
50 1575
125 600
250 275
500 112
800 38
1000 12