Lenze E94AYCCA - Manual (Page 129)

EDS94AYCCA EN 5.0 - 06/2012
L
129
E94AYCCA communication manual (CANopen®)
Parameter reference
Parameters of the communication module for slot MXI2
C14313
C14314
Parameter | Name:
C14313 | CAN TPDO3 mask byte x
Data type: BITFIELD_8
Index: 11262
d
= 2BFE
h
For each byte of the TPDO3 a mask can be parameterised in the corresponding subcode.
• In case of event-controlled transmission of a PDO, only the masked bits are used for the event control.
• Mask "0x0" means that no bit of the corresponding byte triggers the transmission.
• Mask "0xff" means that each bit of the corresponding byte can trigger the transmission.
 Masking of the TPDOs for event control ( 49)
Setting range
0x00
0xFF
Value is bit-coded:
Bit 0 Mask bit 0
... ...
Bit 7 Mask bit 7
Subcodes Lenze setting Information
C14313/1 0x00 Mask for byte 1 ... byte 8 of TPDO3
...
C14313/8
; Read access ; Write access CINH PLC STOP No transfer Scaling factor: 1
Parameter | Name:
C14314 | CAN TPDO4 mask byte x
Data type: BITFIELD_8
Index: 11261
d
= 2BFD
h
For each byte of the TPDO4 a mask can be parameterised in the corresponding subcode.
• In case of event-controlled transmission of a PDO, only the masked bits are used for the event control.
• Mask "0x0" means that no bit of the corresponding byte triggers the transmission.
• Mask "0xff" means that each bit of the corresponding byte can trigger the transmission.
 Masking of the TPDOs for event control ( 49)
Setting range
0x00
0xFF
Value is bit-coded:
Bit 0 Mask bit 0
... ...
Bit 7 Mask bit 7
Subcodes Lenze setting Information
C14314/1 0x00 Mask for byte 1 ... byte 8 of TPDO4
...
C14314/8
; Read access ; Write access CINH PLC STOP No transfer Scaling factor: 1