Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 107)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 107
Configure Your Controller for DeviceNet Communication Chapter 7
9. Set the Node number to match your SmartGuard controller.
The node number is 2 in this example.
10. Click OK.
The following dialog box appears.
11. Right-click 0-3 Bytes and choose Add Alias.
The following dialog box appears.
12. Select the bolded data type (BOOL) and from the appropriate pull-down,
choose the Start Byte, Array Count, and Start Bit.
The values shown above represent bit 0 of the first byte.
13. Enter the Name.
14. Click OK.