Change controller mode – Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual User Manual
Page 137
Advertising
Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
137
Set Controller Modes
Chapter 9
4.
Select the Mode/Cycle Time tab.
5.
Choose Disable (Stand Alone Mode) and click OK.
Change Controller Mode
Follow these steps to change the controller mode.
1.
Go online with the SmartGuard controller.
2.
Right-click the controller and choose Properties.
3.
Select the Mode/Cycle Time tab on the Controller Properties dialog box.
4.
Click Change Mode.
5.
Select the Idle or Execute radio button.
6.
Click OK.
Advertising
This manual is related to the following products: