Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 126)

126 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 8 Configure Your Controller for EtherNet/IP Communication
Configure Target I/O in
RSNetWorx for DeviceNet
Software Follow these steps to create standard EtherNet/IP target I/O assemblies.
1. In RSNetWorx for DeviceNet software, right-click the SmartGuard
controller and choose properties.
2. Click the EtherNet/IP Target I/O tab.
3. Click New.
The following dialog box appears.