Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 174)

174 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 12 Monitor Status and Handle Faults
4. Select the desired terminal and click Edit.
5. On the Edit Maintenance Config dialog box, choose the Detection mode,
either Count or Time.
6. Type an alarm threshold value for the specified Detection mode.
7. Click OK.
8. Click OK.
When you are online with the controller, you can monitor the configured
terminals by clicking Monitor on the Maintenance tab.
Clear the Maintenance Values
Follow these steps to clear the count or on-time accumulated values while online
with the controller.
1. On the Maintenance tab, click Monitor.
Detection Mode Valid Range for Values
Time 0…4,294,967,295 seconds
Count 0…4,294,967,295 times