Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 78)

78 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
Figure 18 - SmartGuard Controller as the Safety Master
Configure CIP Safety I/O Targets on the DeviceNet Network
To configure your module, double-click the module in the graphic view or right-
click the module and choose Properties.
Safety Input, Output, and Test Parameters
Safety parameters are configured by using the Safety Configuration tab on the
Module Properties dialog box.
SmartGuard Controller
- Safety Originator
Safety Connections
CIP Safety I/O Modules