Introduction, General safety information, Chapter 2 – Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual User Manual

Page 23: Introduction general safety information, Chapter

Advertising
background image

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014

23

Chapter

2

Installing and Wiring the SmartGuard 600
Controller

Introduction

General Safety Information

Topic

Page

General Safety Information

23

Understanding Node Addressing

25

Set the Node Address

26

Setting the Communication Rate

26

Mount the SmartGuard Controller

29

Grounding the SmartGuard Controller

30

Connecting a Power Supply

30

Wiring the SmartGuard 600 Controller

34

ATTENTION: Environment and Enclosure

This equipment is intended for use in Pollution Degree 2 Industrial environment, in
Overvoltage Category II applications (as defined in IEC publication 60664-1), at
altitudes up to 2000 m (6562 ft) without derating.

This equipment is considered Group 1, Class A industrial equipment according to
IEC/CISPR Publication 11. Without appropriate precautions, there may be potential
difficulties ensuring electromagnetic compatibility in other environments due to
conducted as well as radiated disturbance.

This equipment is supplied as open type equipment. It must be mounted within an
enclosure that is suitably designed for those specific environmental conditions that
will be present and appropriately designed to prevent personal injury resulting
from accessibility to live parts. The enclosure must have suitable flame-retardant
properties to prevent or minimize the spread of flame, complying with flame
spread rating or 5VA, V2, V1, V0 (or equivalent) if non-metallic. The interior of the
enclosure must be accessible only by the use of a tool. Subsequent sections of this
publication may contain additional information regarding specific enclosure type
ratings that are required to comply with certain product safety certifications.

In addition to this publication, see:

· Industrial Automation Wiring and Grounding Guidelines, Allen-Bradley

publication 1770-4.1.

· NEMA Standards publication 250 and IEC publication 60529, as applicable, for

explanations of the degrees of protection provided by different types of
enclosure.

Advertising
This manual is related to the following products: