Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 108)

108 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
The following dialog box appears.
To add a second BOOL that represents bit 1 of the first byte, follow this
procedure.
1. Right-click 0-3 Bytes and choose Add Alias.
The following dialog box appears when BOOL data type is selected.
2. From the appropriate pull-down menu, choose the Start Byte, Array
Count, and Start Bit.
3. Enter the Name.
4. Click OK.