Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 113)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 113
Configure Your Controller for DeviceNet Communication Chapter 7
The Input tab is shown below and so the PV_to_SG tags are displayed. To
view the SG_to_PV tags, click the Output tab.
8. Download the configuration to the SmartGuard 600 controller.
Configure the Scanlist of the PanelView Scanner
For the PanelView Plus DeviceNet scanner, you must configure the scan list.
Follow this procedure to add the SmartGuard 600 controller to the Scan list.
1. Click the Scanlist tab.
2. Click the right arrow to move the SmartGuard controller to the scanlist.
3. Click Edit I/O Parameters and verify it is configured as shown below.