Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 135)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 135
Chapter
9
Set Controller Modes
Introduction
Set Automatic Execution
Mode (optional) The controller can be configured for Normal mode or Automatic Execution
mode. Set the Automatic Execution mode only after the system has been
configured. The setting becomes effective after you have cycled power following a
configuration download.
Follow these steps to set the mode.
1. Right-click the controller and choose Properties.
2. Select the Mode/Cycle Time tab.
Topic Page
Set Automatic Execution Mode (optional) 135
Set Standalone Communication Mode (optional) 136
Change Controller Mode 137