Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 55)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 55
Set Up Your EtherNet/IP Network Chapter 4
The RSWho dialog box appears.
4. Navigate in RSWho to the Ethernet network.
5. Right-click the SmartGuard controller and choose Module Configuration.
The Module Configuration dialog box appears.
TIP The module configuration option is also shown when viewing the
SmartGuard controller from DeviceNet software, but the IP
configuration is applied only when it is executed directly from the
EtherNet/IP network.