Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 98)

98 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
11. To create a tag name for each bit in an I/O assembly, follow these steps.
a. Select the applicable assembly and click Edit Comment.
b. Type a comment for each bit in the tag.
The tag name comments typed here are displayed in the Logic Editor.
c. Click OK.
12. Click OK again to return to the Slave I/O tab.
13. Create additional slave input or output assemblies as required for your
application by repeating steps 4…12.
14. From the File menu, choose Save to save your configuration.