Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual User Manual
Page 156
156
Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 10
Create Your Application Program
3.
Validate the user-defined function block.
a. In the object list of the Logic Editor, right-click the new function block
and choose Validate.
b. Click OK on the confirmation dialog box.
The icon for the new function block changes from white to yellow to
indicate that the function block has been validated.
4.
Export the user-defined function block to a file.
a. In the object list of the Logic Editor, click the saved user-defined
function block.
b. From the main menu, choose FunctionBlock>Export.
c. In the Save As dialog box, type a name for the file and click Save.
5.
Move or copy the file to other personal computers, if necessary.
6.
Import the user-defined function block.
a. In RSNetWorx for DeviceNet software, create a new project and add a
SmartGuard controller.
b. Right-click the controller, choose Properties and select the Logic tab.
c. Click Edit to start the Logic Editor.
d. Choose FunctionBlock>Import.
e. Select the appropriate file and click Open.
The imported, user-defined function block is displayed in the object
list of the logic editor.
IMPORTANT
Always import user-defined function block files before editing
or verifying application programs that will use them.