Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 119)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 119
Configure Your Controller for DeviceNet Communication Chapter 7
1. Right-click 0-0 Bytes and choose Add Alias.
2. Select the BOOL data type and from the appropriate pull-down, choose
the Start Byte, Array Count, and Start Bit.
3. Enter the Name.
4. Enter the initial value of 0.
5. Click OK.
The following dialog box appears.
6. Click OK.
The final step is to create the PanelView Plus graphic that reads the alias tags.
This example will use 2 maintained buttons that read the 2 aliases.