Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual User Manual
Page 117
Advertising
Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
117
Configure Your Controller for DeviceNet Communication
Chapter 7
The following dialog box appears.
4.
Right-click 0-0 Bytes and choose Add Devices.
The following dialog box appears.
5.
Set the Node number to match your SmartGuard controller.
The node number is 2 in this example.
6.
Click OK.
The following Dialog box appears.
7.
Right-click 0-0 Bytes and choose Add Alias.
Advertising
This manual is related to the following products: