Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 53)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 53
Set Up Your EtherNet/IP Network Chapter 4
In the BOOTP Request History panel you will see the hardware addresses
of devices issuing BOOTP requests.
2. Double-click the hardware address of the device you want to configure.
You will see the New Entry pop-up window with the device's Ethernet
Address (MAC).
3. Enter the IP Address (Hostname and Description are optional) that you
want to assign to the device, and click OK.