Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 13)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 13
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual.
• the purpose of this manual.
• additional resources.
• conventions used in this manual.
Who Should Use This Manual Use this manual if you are responsible for designing, installing, programming, or
troubleshooting control systems that use SmartGuard™ 600 controllers.
You must have a basic understanding of electrical circuitry and familiarity with
relay logic. You must also be trained and experienced in the creation, operation,
and maintenance of safety systems.
Purpose of This Manual This manual is a guide for using SmartGuard 600 controllers. It describes the
specific procedures you use to configure, operate, and troubleshoot your
SmartGuard 600 controller.
Additional Resources The table provides a listing of publications that contain important information
about SmartGuard 600 controller systems.
You can view or download publications at http://
www.rockwellautomation.com/literature. To order paper copies of technical
documents, contact your local Allen-Bradley® distributor or Rockwell
Automation sales representative.
Resource Description
SmartGuard 600 Controller Installation Instructions,
publication 1752-IN001 Information on installing the SmartGuard 600 controller
SmartGuard Controllers Systems Safety Reference Manual,
publication 1752-RM001 Detailed requirements for achieving and maintaining SIL
3 with the SmartGuard controller system
DeviceNet Safety I/O Installation Instructions, publication
1791DS-IN001 Information on installing Guard I/O™ DeviceNet Safety
modules
Guard I/O DeviceNet Safety Modules User Manual,
publication 1791DS-UM001 Information on using Guard I/O DeviceNet Safety modules
DeviceNet Media Design Installation Guide, publication
DNET-UM072 Information on planning your EtherNet/IP™ network