Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 70)

70 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 6 Configure Local I/O
9. Specify an On Delay time and an Off Delay time.
The valid range is 0…126 ms, but the delay time must be a multiple of the
cycle time.
Example: Input Channel as Test Pulse from Test Output
For the following wiring diagram, the channel mode must be configured as Test
pulse from test out, as shown.
IMPORTANT The optimum value for controller cycle time is automatically calculated
based on the parameter settings and the application programs.
Therefore, set the on- and off-delay times last.
V1 G1 T 0
T1
I1
I0
I3 I5
I2 I4 I6
I7
T2
T3
E1
S1
11 21
12 22
O1
O0
V2 G 2 O3 O5
O2 O4 O6
O7
E2
KM 1 KM 2
I9
I8
I1 1 I1 3
I1 0 I1 2 I1 4
I1 5
KM 1 - N C
KM 2 - N C
M
KM1
KM2
S2