Bio-Rad Profinia™ Protein Purification Instrument - Manual (Page 110)

Manual control screen — center section of the screen, for manually operating system
components
Toolbar — lower section of the screen, includes command button options described in
section 3.3
To change the system component settings prior to starting a run:
1. On the Manual Operation screen, touch the up and down arrows to scroll through the
list of components and highlight a component to manually operate.
2. Touch the Edit button to retrieve the numeric keypad.
3. Enter the value (for example, flow rate, valve position, proportioning percent) desired.
4. Touch OK to confirm and return to the main screen.
5. When all values on the screen are set correctly, touch Update to start the system as
described for each component in the list of adjustable components above.
To change the system component settings when a run is in progress:
1. On the Manual Operation screen, touch the arrow buttons to highlight the desired com-
ponent.
2. Touch the Edit button to retrieve the numeric keypad and enter the new values; touch
OK to return to the Manual Operation screen.
3. Touch Update to continue the run with the new settings.
103