Bio-Rad Profinia™ Protein Purification Instrument - Manual (Page 97)

2. Use the arrows to select the viewing mode by: “Method System” or “All Method
Systems”. Touch the Next button to proceed to the Select Saved Method screen.
8.2 Selecting Saved Methods
In the Select Saved Method screen (Figure 8.3), immediately above the list of saved methods,
the date the method was created, the username (person who created the method), and the
method type display for the highlighted method.
Note: To ensure that you are listed as the person who created your method, make sure
you enter your name in the Username field of the Enter Run & Sample Information screen
when programming a method.
Note: System date and time settings can be modified under the Data/Utilities menu; see
section 9.3.3 for more information.
Fig. 8.2. Select Saved Method screen with username, creation date, and method type displayed for the
highlighted stored method.
The following options are available in the Select Saved Method screen:
• Delete — deletes the selected method only; a popup message appears, requesting
confirmation
• Rename — renames the selected method; the old name will be overwritten with the
new name. To create a duplicate method with a different name press Select, edit the
method name in the Enter Run & Sample Information screen, and press Save; this is
the equivalent to a “save as” function
• Select — opens the highlighted method and proceeds to the Enter Run & Sample
Information screen
• Back — returns to the Select Method Type to View screen
• i — retrieves help information about the screen
8.3 Running Saved Methods
To run a saved method, highlight the desired method from the Select Saved Method
screen and touch the Select button to proceed to the Enter Run & Sample Information
90