Bio-Rad Profinia™ Protein Purification Instrument - Manual (Page 58)

Fig. 6.25. Completing the cartridge installation procedure.
6. Repeat this procedure to install a Bio-Scale Mini cartridge into the cartridge 2 position.
Note: If no cartridge will be placed in the cartridge 2 position, keep the system cartridge
fittings in the closed position (Figure 6.26).
Note: Do not overtighten fittings. Luer lock fittings are designed to seal when turned to
snug. The cartridge flange may be damaged by overtightening and cause leakage. In this
case, replace the cartridge.
51