Figure 49: displaying lacp port counters, Table 7: lacp internal configuration information, Lacp s – Microsens MS453490M Management Guide User Manual
Page 144
C
HAPTER
5
| Interface Configuration
Trunk Configuration
– 144 –
Figure 49: Displaying LACP Port Counters
D
ISPLAYING
LACP
S
ETTINGS
AND
S
TATUS
FOR
THE
L
OCAL
S
IDE
Use the Interface > Trunk > Dynamic (Configure Aggregation Port - Show
Information - Internal) page to display the configuration settings and
operational state for the local side of a link aggregation.
CLI R
EFERENCES
◆
P
ARAMETERS
These parameters are displayed:
Table 7: LACP Internal Configuration Information
Parameter
Description
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority
LACP port priority assigned to this interface within the channel group.
Admin Key
Current administrative value of the key for the aggregation port.
Oper Key
Current operational value of the key for the aggregation port.