Microsens MS453490M Management Guide User Manual
Page 367
C
HAPTER
15
| Basic Administration Protocols
Link Layer Discovery Protocol
– 367 –
◆
Remote Link Aggregation Port ID – This object contains the IEEE
802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002,
30.7.2.1.1), derived from the ifNumber of the ifIndex for the port
component associated with the remote system. If the remote port is
not in link aggregation state and/or it does not support link
aggregation, this value should be zero.
Port Details – 802.3 Extension Frame Information
◆
Remote Max Frame Size – An integer value indicating the maximum
supported frame size in octets on the port component associated with
the remote system.
W
EB
I
NTERFACE
To display LLDP information for a remote port:
1.
Click Administration, LLDP.
2.
Select Show Remote Device Information from the Step list.
3.
Select Port, Port Details, Trunk, or Trunk Details.
Figure 209: Displaying Remote Device Information for LLDP (Port)
Figure 210: Displaying Remote Device Information for LLDP (Port Details)