Microsens MS453490M Management Guide User Manual
Page 461
Advertising
C
HAPTER
18
| Multicast Filtering
Filtering and Throttling IGMP Groups
– 461 –
3.
Select Show from the Action list.
Figure 281: Showing the IGMP Filtering Profiles Created
To add a range of multicast groups to an IGMP filter profile:
1.
Click Multicast, IGMP Snooping, Filtering.
2.
Select Add Multicast Group Range from the Action list.
3.
Select the profile to configure, and add a multicast group address or
range of addresses.
4.
Click Apply.
Figure 282: Adding Multicast Groups to an IGMP Filtering Profile
Advertising