Show ip igmp snooping group, Show ip igmp snooping, Group – Microsens MS453490M Management Guide User Manual
Page 866
C
HAPTER
37
| Multicast Filtering Commands
IGMP Snooping
– 866 –
.
.
show ip igmp
snooping group
This command shows known multicast group, source, and host port
mappings for the specified VLAN interface, or for all interfaces if none is
specified.
S
YNTAX
show ip igmp snooping group [vlan vlan-id [user | igmpsnp]]
[user | igmpsnp]
vlan-id - VLAN ID (1-4093)
user - Display only the user-configured multicast entries.
igmpsnp - Display only entries learned through IGMP snooping.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Member types displayed include IGMP or USER, depending on selected
options.
E
XAMPLE
The following shows the multicast entries learned through IGMP snooping
for VLAN 1.
Console#show ip igmp snooping group vlan 1
Bridge Multicast Forwarding Entry Count:0
VLAN Group Source Port List
-------- ---------------- ---------------- ---------------------------------
1 224.1.1.12 * Eth 1/ 9(S)
1 224.1.1.12 * Eth 1/10(D)
Console#