Microsens MS453490M Management Guide - Manual (Page 898)

C HAPTER 38 | LLDP Commands
– 898 –
PortID Type : MAC Address
PortID : 00-01-02-03-04-06
SysName :
SysDescr : 24 10/100 ports and 4 gigabit ports with PoE switch
PortDescr : Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge
SystemCapEnabled : Bridge
Remote Management Address :
00-01-02-03-04-05 (MAC Address)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Protocol Identity (Hex) :
88-CC
Remote MAC/PHY configuration status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 0000
Remote port MAU type : 6
Remote Power Via Mdi :
Remote power class : PSE
Remote power mdi supported : Yes
Remote power mdi enabled : Yes
Remote power pair controlable : No
Remote power pairs : Spare
Remote power classification : Class1
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggragation enable : No
Remote link aggragation port id : 0
Remote Max Frame Size : 1518
Console#
show lldp info
statistics
This command shows statistics based on traffic received through all
attached LLDP-enabled interfaces.
S YNTAX
show lldp info statistics [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
C OMMAND M ODE
Privileged Exec