Network-access link-detection – Microsens MS453490M Management Guide User Manual
Page 646
C
HAPTER
25
| General Security Measures
Network Access (MAC Address Authentication)
– 646 –
C
OMMAND
M
ODE
Interface Configuration
C
OMMAND
U
SAGE
◆
The VLAN to be used as the guest VLAN must be defined and set as
active (See the
command).
◆
When used with 802.1X authentication, the intrusion-action must be
set for “guest-vlan” to be effective (see the
command).
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
network-access
link-detection
Use this command to enable link detection for the selected port. Use the
no form of this command to restore the default.
S
YNTAX
[no] network-access link-detection
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#