Ipv6 address, Ipv6 address (927) – Microsens MS453490M Management Guide User Manual

Page 927

Advertising
background image

C

HAPTER

41

| IP Interface Commands

IPv6 Interface

– 927 –

ipv6 address

This command configures an IPv6 global unicast address and enables IPv6

on an interface. Use the no form without any arguments to remove all IPv6

addresses from the interface, or use the no form with a specific IPv6

address to remove that address from the interface.

S

YNTAX

[no] ipv6 address ipv6-address/prefix-length

ipv6-address - A full IPv6 address including the network prefix and

host address bits.
prefix-length - A decimal value indicating how many contiguous bits

(from the left) of the address comprise the prefix (i.e., the network

portion of the address).

D

EFAULT

S

ETTING

No IPv6 addresses are defined

C

OMMAND

M

ODE

Interface Configuration (VLAN)

C

OMMAND

U

SAGE

All IPv6 addresses must be according to RFC 2373 “IPv6 Addressing

Architecture,” using 8 colon-separated 16-bit hexadecimal values. One

double colon may be used in the address to indicate the appropriate

number of zeros required to fill the undefined fields.

To connect to a larger network with multiple subnets, you must

configure a global unicast address. This address can be manually

configured with this command, or it can be automatically configured

using the ip

ipv6 address autoconfig

command.

If a link-local address has not yet been assigned to this interface, this

command will assign the specified static global unicast address and also

dynamically generate a link-local unicast address for the interface. (The

link-local address is made with an address prefix of FE80 and a host

portion based the switch’s MAC address in modified EUI-64 format.)

If a duplicate address is detected, a warning message is sent to the

console.

E

XAMPLE

This example specifies a full IPv6 address and prefix length.

Console(config)#interface vlan 1

Console(config-if)#ipv6 address 2001:DB8:2222:7272::72/96

Console(config-if)#end

Console#show ipv6 interface

Vlan 1 is up

IPv6 is enable.

Link-local address:

FE80::2E0:CFF:FE00:FD/64

Global unicast address(es):

2001:DB8:2222:7272::72/96, subnet is 2001:DB8:2222:7272::/96

Advertising