Microsens MS453490M Management Guide - Manual (Page 491)

C HAPTER 20 | General Commands
– 491 –
show reload This command displays the current reload settings, and the time at which
next scheduled reload will take place.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show reload
Reloading switch in time: 0 hours 29 minutes.
The switch will be rebooted at January 1 02:11:50 2001.
Remaining Time: 0 days, 0 hours, 29 minutes, 52 seconds.
Console#
end This command returns to Privileged Exec mode.
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration, Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration.
E XAMPLE
This example shows how to return to the Privileged Exec mode from the
Interface Configuration mode:
Console(config-if)#end
Console#
exit This command returns to the previous configuration mode or exits the
configuration program.
D EFAULT S ETTING
None
C OMMAND M ODE
Any