Microsens MS453490M Management Guide - Manual (Page 438)

C HAPTER 17 | IP Services
Configuring Static DNS Host to Address Entries
– 438 –
W EB I NTERFACE
To configure static entries in the DNS table:
1. Click IP Service, DNS, Static Host Table.
2. Select Add from the Action list.
3. Enter a host name and the corresponding address.
4. Click Apply.
Figure 265: Configuring Static Entries in the DNS Table
To show static entries in the DNS table:
1. Click IP Service, DNS, Static Host Table.
2. Select Show from the Action list.
Figure 266: Showing Static Entries in the DNS Table