Figure 78: configuring mac-based vlans, Figure 79: showing mac-based vlans – Microsens MS453490M Management Guide User Manual
Page 182
Advertising
C
HAPTER
6
| VLAN Configuration
Configuring MAC-based VLANs
– 182 –
W
EB
I
NTERFACE
To map a MAC address to a VLAN:
1.
Click VLAN, MAC-Based.
2.
Select Add from the Action list.
3.
Enter an address in the MAC Address field.
4.
Enter an identifier in the VLAN field. Note that the specified VLAN need
not already be configured.
5.
Enter a value to assign to untagged frames in the Priority field.
6.
Click Apply.
Figure 78: Configuring MAC-Based VLANs
To show the MAC addresses mapped to a VLAN:
1.
Click VLAN, MAC-Based.
2.
Select Show from the Action list.
Figure 79: Showing MAC-Based VLANs
Advertising