Microsens MS453490M Management Guide - Manual (Page 437)

C HAPTER 17 | IP Services
Configuring Static DNS Host to Address Entries
– 437 –
To show the list name servers:
1.
Click IP Service, DNS.
2.
Select Show Name Servers from the Action list.
Figure 264: Showing the List of Name Servers for DNS
C ONFIGURING S TATIC DNS H OST TO A DDRESS E NTRIES
Use the IP Service > DNS - Static Host Table (Add) page to manually
configure static entries in the DNS table that are used to map domain
names to IP addresses.
CLI R EFERENCES
◆ "ip host" on page 904
◆ "show hosts" on page 908
C OMMAND U SAGE
◆ Static entries may be used for local devices connected directly to the
attached network, or for commonly used resources located elsewhere
on the network.
P ARAMETERS
These parameters are displayed:
◆ Host Name – Name of a host device that is mapped to one or more IP
addresses. (Range: 1-127 characters)
◆ IP Address – Internet address(es) associated with a host name.