Microsens MS453490M Management Guide - Manual (Page 604)

C HAPTER 24 | Authentication Commands
Web Server
– 604 –
ip http port This command specifies the TCP port number used by the web browser
interface. Use the no form to use the default port.
S YNTAX
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
D EFAULT S ETTING
80
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#ip http port 769
Console(config)#
R ELATED C OMMANDS
ip http server (604)
show system (507)
ip http server This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
S YNTAX
[no] ip http server
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#ip http server
Console(config)#
R ELATED C OMMANDS
ip http port (604)
show system (507)