Figure 56: configuring vlan trunking – Microsens MS453490M Management Guide User Manual
Page 153
Advertising
C
HAPTER
5
| Interface Configuration
VLAN Trunking
– 153 –
P
ARAMETERS
These parameters are displayed:
◆
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 9-10)
N
OTE
:
VLAN trunking can only be enabled on Gigabit ports.
◆
Trunk – Trunk Identifier. (Range: 1-5)
◆
VLAN Trunking Status – Enables VLAN trunking on the selected
interface.
W
EB
I
NTERFACE
To enable VLAN trunking on a port or trunk:
1.
Click Interface, VLAN Trunking.
2.
Click Port or Trunk to specify the interface type.
3.
Enable VLAN trunking on any of the Gigibit ports or on a trunk
containing Gigabit ports.
4.
Click Apply.
Figure 56: Configuring VLAN Trunking
Advertising