Microsens MS453490M Management Guide - Manual (Page 608)

C HAPTER 24 | Authentication Commands
Telnet Server
– 608 –
ip telnet port This command specifies the TCP port number used by the Telnet interface.
Use the no form to use the default port.
S YNTAX
ip telnet port port-number
no telnet port
port-number - The TCP port number to be used by the browser
interface. (Range: 1-65535)
D EFAULT S ETTING
23
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#ip telnet port 123
Console(config)#
ip telnet server This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
S YNTAX
[no] ip telnet server
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#ip telnet server
Console(config)#