Microsens MS453490M Management Guide - Manual (Page 767)

C HAPTER 33 | Spanning Tree Commands
– 767 –
C OMMAND M ODE
MST Configuration
C OMMAND U SAGE
The MST region name and revision number ( page 767 ) are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
E XAMPLE
Console(config-mstp)#name R&D
Console(config-mstp)#
R ELATED C OMMANDS
revision (767)
revision This command configures the revision number for this multiple spanning
tree configuration of this switch. Use the no form to restore the default.
S YNTAX
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
D EFAULT S ETTING
0
C OMMAND M ODE
MST Configuration
C OMMAND U SAGE
The MST region name ( page 766 ) and revision number are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
E XAMPLE
Console(config-mstp)#revision 1
Console(config-mstp)#
R ELATED C OMMANDS
name (766)