Microsens MS453490M Management Guide - Manual (Page 591)

C HAPTER 24 | Authentication Commands
RADIUS Client
– 591 –
D EFAULT S ETTING
2
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#radius-server retransmit 5
Console(config)#
radius-server
timeout
This command sets the interval between transmitting authentication
requests to the RADIUS server. Use the no form to restore the default.
S YNTAX
radius-server timeout number-of-seconds
no radius-server timeout
number-of-seconds - Number of seconds the switch waits for a
reply before resending a request. (Range: 1-65535)
D EFAULT S ETTING
5
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#radius-server timeout 10
Console(config)#
show radius-server This command displays the current settings for the RADIUS server.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show radius-server
Remote RADIUS Server Configuration:
Global Settings:
Auth-port : 1812
Acct-port : 1813