GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 11)

Input polarity of control terminals
Illustration 1.3 PNP (Source)
Illustration 1.4 NPN (Sink)
NOTE
Control cables must be screened/armoured.
Illustration 1.5 Earthing of Screened/Armoured Control Cables
1.6.2 Start/Stop
Terminal 18 = E-01 Terminal 18 Digital Input [8] Start
Terminal 37 = Safe stop (where available)
12 13 18 32 27 19 29 33 20
Illustration 1.6 Start/Stop
Introduction AF-650 GP Programming Guide
10 DET-618C
1 1