GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 92)

O-43 PCD Read Configuration
Range: Function:
[1250] External Reference
[1251] Pulse Reference
[1252] Feedback[Unit]
[1253] Digi Pot Reference
[1257] Feedback [RPM]
[1260] Digital Input
[1261] Terminal 53 Switch Setting
[1262] Analog Input 53
[1263] Terminal 54 Switch Setting
[1264] Analog Input 54
[1265] Analog Output 42 [mA]
[1266] Digital Output [bin]
[1267] Freq. Input #29 [Hz]
[1268] Freq. Input #33 [Hz]
[1269] Pulse Output #27 [Hz]
[1270] Pulse Output #29 [Hz]
[1271] Relay Output [bin]
[1272] Counter A
[1273] Counter B
[1274] Prec. Stop Counter
[1275] Analog In X30/11
[1276] Analog In X30/12
[1277] Analog Out X30/8 [mA]
[1284] Comm. Option STW
[1285] Drive Port CTW 1
[1287] Bus Readout Alarm/Warning
[1290] Alarm Word
[1291] Alarm Word 2
[1292] Warning Word
[1293] Warning Word 2
[1294] Ext. Status Word
[1500] Operating hours
[1501] Running Hours
[1502] kWh Counter
3.10.5 O-5# Digital/Bus
Parameters to configure the control word Digital/Bus
merging.
O-50 Coasting Select
Option: Function:
Select control of the coasting function via the
terminals (digital input) and/or via the network.
[0] Digital
input
Activates Coast command via a digital input.
[1] Bus Activates Coast command via the serial
communication port or network option
module.
[2] Logic AND Activates Coast command via the network/
serial communication port, AND additionally
via one of the digital inputs.
O-50 Coasting Select
Option: Function:
[3] * Logic OR Activates Coast command via the network/
serial communication port OR via one of the
digital inputs.
O-51 Quick Stop Select
Select control of the Quick Stop function via the terminals
(digital input) and/or via the network.
Option: Function:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
O-52 DC Brake Select
Option: Function:
Select control of the DC brake via the terminals
(digital input) and/or via the fieldbus.
NOTE
Only selection [0] Digital input is available
when P-20 Motor Construction is set to [1]
PM non-salient SPM.
[0] * Digital
input
ActivatesDC Brake command via a digital input.
[1] Bus ActivatesDC Brake command via the serial
communication port or network option module.
[2] Logic AND ActivatesDC Brake command via the network/
serial communication port, AND additionally via
one of the digital inputs.
[3] Logic OR ActivatesDC Brake command via the network/
serial communication port OR via one of the
digital inputs.
O-53 Start Select
Option: Function:
Select control of the frequency converter start
function via the terminals (digital input) and/or
via the network.
[0] Digital
input
Activates Start command via a digital input.
[1] Bus Activates Start command via the serial
communication port or network option
module.
[2] Logic AND Activates Start command via the network/serial
communication port, AND additionally via one
of the digital inputs.
[3] * Logic OR Activates Start command via the network/serial
communication port OR via one of the digital
inputs.
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 91
3 3