GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 142)

4 Parameter Lists
4.1 Parameter Options
4.1.1 Introduction
Changes during operation
”TRUE” means that the parameter can be changed while
the frequency converter is in operation and “FALSE” means
that the frequency converter must be stopped before a
change can be made.
4-Set-up
'All set-ups': the parameter can be set individually in each
of the four set-ups, i. e. one single parameter can have
four different data values.
’1 set-up’: data value will be the same in all set-ups.
Data
type
Description Type
2 Integer 8 Int8
3 Integer 16 Int16
4 Integer 32 Int32
5 Unsigned 8 Uint8
6 Unsigned 16 Uint16
7 Unsigned 32 Uint32
9 Visible String VisStr
33 Normalized value 2 bytes N2
35 Bit sequence of 16 boolean variables V2
54 Time difference w/o date TimD
Table 4.1 Data Type
Parameter Lists AF-650 GP Programming Guide
DET-618C 141
4 4